Page 120 - 捷運技術 第38期

114 林來成 營運中松山機場停機坪下方連絡通道施工—以捷運內湖線CB420標為例

營運中松山機場停機坪下方連絡通道施工

—以捷運內湖線CB420標為例

林來成

摘要

臺北捷運內湖線CB420標自松山機場站（BR1）東端起，以潛盾隧道通過松山機場下方
至濱江街通風豎井，全長1200餘公尺，共設置2處連絡通道，長度均為20公尺。在設計階段
考量施工因素及降低對機場跑滑道之影響，特將連絡通道的位置安排於機場草皮區下方，惟

工程開工後，因航站重新規劃，將其中一處連絡通道（CP1）上方草皮改建為停機坪，此改
變對於本連絡通道之地盤改良、開挖支撐、結構施工等均造成不利之影響。本文描述本連絡
通道在地表條件改變下，各工項之施工過程及因應地表改變之各項措施。
關鍵詞：潛盾隧道、連絡通道、監測、跑道、滑行道、停機坪、地盤改良

Construction of the MRT Cross Passage Beneath the Apron of Songshan
Airport: Contract CB420 of the Neihu MRT Line

Li-Chen Lin

Abstract
The shield tunnel of Neihu line's Contract CB420 goes underground on the southern side of
the Songshan Airport (BR1 Station), then tunnels northbound beneath the airport and the Keelung

River, reaching Beian Road in Dazhi (B1 Station). The route is approximately 1.2 km, and 2 cross
passages have been set up. There were two 20-meter cross passages beneath the grass verge of the
Songshan Airport in the detailed design. During the detailed design stage, due to construction factors

and to reduce the impact on the runway, the cross passages were placed beneath the airport's grass
verge. Unfortunately, the grass verge above CP1 was replaced with the rigid pavement of runway
apron and this caused a series of changes in the construction approach, such as ground treatment,
excavation, and strut systems. This article details the revised measures that were implemented due
to the changes in ground conditions.

Keywords: shield tunnel, cross passage, monitoring, runway, taxiway, apron, ground treatment

台北市政府捷運工程局東區工程處工務所主任 linlc@trts.dorts.gov.tw